Shower Enclosures, Doors, and Partition Options

Frameless Enclosures

Think about your self surrounded by a chic, custom-designed, heavy glass, frameless enclosure with 3/8″ thick glass, tempered on your security, and polished edges, with {hardware} chosen to match the end and design of your tub fixtures. Heavy glass (frameless) enclosures first turned fashionable in higher-end houses, motels, and condos, however are actually discovered within the majority of newly-constructed and newly-remodeled houses. They aren’t your grandma’s old-time door with obscure glass. These enclosures provide the really feel of an expensive spa proper in your individual rest room.

Frameless doorways are normally hinged from one wall with a facet panel (generally notched over a seat or half wall) with a 90° “return” panel resting on prime of the half wall. These panels could be secured to the wall with clips (the preferred utility), or with a “U-channel” which is a strip of steel, put in on the wall on the facet and backside of the enclosure to position the glass. The “U-channel” will match the end of the hinges and fixtures. Relying on the configuration of your rest room, the panels could be full size from ground to your specified top.

glass shower door seal strip like these allow you to bathe within the consolation of realizing that you’ve got made a wonderful alternative.

Fashionable {hardware} finishes are available Silver/chrome, Brushed Nickel, and Oil-rubbed Bronze however different {custom} finishes can be found.

There are a number of sample glass choices accessible; nonetheless, essentially the most frequent alternative is evident glass to point out off your newly put in tile.


Another choice is a semi-frameless enclosure which affords a frameless door with polished edges, and a {custom} pull deal with that mounts by way of the glass. The door is hooked up to the perimeter body with a steady hinge – a hinge that runs the complete size of the door glass on the hinged facet. All different panels are framed with steel that match your fixtures.

You get the look of a frameless enclosure with out the upper price. Additionally accessible are prime quality, framed bathe enclosure or by-pass sliding doorways if that’s extra to your liking.

Framed Enclosures

Framed enclosures are essentially the most economical and water proof. These enclosures supply absolutely framed, tempered glass. The door is secured with full size magnets on the strike facet to make sure correct seal together with a climate strip and drip sweep on the backside to be sure that all of the water runs to the within of the bathe, as an alternative of onto the ground These doorways/enclosures stands out as the most economical and prime quality with a custom-look steel end. These doorways stand as much as years of use, particularly in your kids’s rest room. From a security perspective, there are not any uncovered glass edges as you’d discover with a frameless or semi-frameless bathe.

By-pass bathe doorways have come a good distance since Granma had them. With the {custom} finishes and glass choices, you may select from, equivalent to frameless glass with {custom}, by way of the glass towel bars/handles – these doorways are stunning in addition to purposeful in areas the place a hinged door just isn’t potential, equivalent to when the bathroom or sink and cupboard are too near the bathtub/bathe.

Glass Choices for Enclosures

The glass choices for sliding doorways are quite a few and various. Rain glass, patterned glass, glue chip and tempered are a few of your choices. The usual frameless, 3/16″ tempered glass thickness is essentially the most economical in both framed or frameless and have clamp on towel bars; or one other frameless model has ¼” thick glass, with through-the-glass towel bars or for a extra {custom} look, 3/8″ thick tempered glass is out there for the last word {custom} look in by-pass enclosures.

A further possibility that’s gaining recognition is the partition which consists of a number of 3/8″ thick, tempered glass panel(s) that’s mounted to the wall(s) or half wall(s), permitting simpler entry. Since there isn’t any door put in, there are not any transferring elements.

Your enclosures/partitions require professional set up and a eager consideration to element. They need to include a guaranty on workmanship/set up, which also needs to embody door changes or seal failure.


Leave a Reply

Your email address will not be published. Required fields are marked *